The design of the AIRMASTER® UK units is based on a modular kit system. Components such as controls, smoke generator and cleaning system can be arranged individually according to your desires or spatial requirements.

Depending on the unit size, the chamber housing of AIRMASTER® UK comprises one or more chamber modules. Each chamber module is very sturdy and is made of 100 % chromium-nickel steel, material no. 1.4301, and is welded to be smoke and steam-tight. Mineral full insulation (temperature-resistant up to +650°C) protects against heat losses. Importance was attached to avoiding thermal bridges in the construction of the unit.

The top section of each chamber module contains the air preparation unit with ventilator, heat battery and optional cooling. The greatest advantage of this modular system compared to systems with a central unit is that each chamber trolley is supplied exactly the same with air, heat or cold energy and therefore absolute consistency is also ensured from trolley to trolley.

Added-value from modular design:

•  Same results in all trolleys
•  Tightly welded chamber modules
•  Fully stainless steel 1.4301
•  Mineral full insulation
•  No uninsulated housing parts
•  Small width and height
•  Low-maintenance and reliable
•  Particular stability and service life

The AIRMASTER® UK works with the proven vertical airflow principle. The air, which has been treated in the upper section, flows around the products from bottom to top. A newly developed blowing system guarantees that the products are treated consistently and in the shortest time in all positions of the chamber trolley. Compared to the competition, REICH systems work with particularly strong ventilators, thereby achieving more output and efficiency.

More output:

•  Highest air volumes
•  Short, energy-efficient processes
•  Maximum yield
•  Greatest possible consistency
•  Best product quality
•  High load capacity
•  Process temperatures up to + 200 °C

Only high-quality products from German brand manufacturers are used for all heavily used parts such as motors, ventilator impellers, valves, cylinders, etc. In this way, we ensure that the highest quality and reliability are achieved in detail.

Each AIRMASTER® has a robust chamber floor. Packing with heavily loaded chamber trolleys is not a problem. In a special version, packing is also possible using forklifts. The floor construction is kept very flat and has a sloped entrance. The substructure of the chamber floor is reinforced in the direction of travel with strong U profiles.

All AIRMASTER® systems are fitted with one or more fully insulated, stable block doors, which are sealed against the chamber housing all the way around with a silicon seal. The door hinges are made entirely from chromium-nickel steel for the high demands of seal and long service life. The doorstop can be fitted left or right as required.

For fresh air, exhaust and smoke flaps, tight-closing, metallic folding flaps or silicon rubber rotating flaps are used. These flaps have multifunctional positions for controlling the amount of the volume flows.

The systems can be fitted either with electric heating, steam heating, gas or oil-burner heating.